|
The RoeVac® vacuum toilet has been designed particularly as a water saving device and for maximum convenience. It is available for wall or floor mounting. Both models are available in china and the floor-mounted model is also available in stainless steel.
The vacuum toilet is fully equipped with interface valve, water valve and controller. It requires only one litre of water
per flush but approximately 60 litres of air are also sucked into the system to assist in transporting the wastewater
through the pipe network to the vacuum station. The toilet has a stainless steel nozzle on either side of the bowl through which rinsing water is sprayed.
The diameter of the RoeVac® vacuum toilet outlet pipe is approx. 50 mm and is connected to the sanitation system by a pipe of similar size. All waste passed through the vacuum toilet will therefore pass through the entire pipe network.
The RoeVac® vacuum toilet operates as follows:
- Step 1: The user pushes the push-button, the interface valve is opened and the wastewater is evacuated. Air is also sucked into the system. At the same time the clean water valve is opened and rinsing water is sprayed into the bowl.
- Step 2: The vacuum valve is closed but the water valve remains open. A small amount of fresh water is sprayed into the bowl.
- Step 3: The water valve is closed, a small volume of clean water is retained in the bowl and the toilet is ready for use.
The RoeVac® vacuum toilet has been tested for compliance with European standards.
|
